Dremel | 454 Grinding Stone 4.8mm 3Pc
4,8mm 3Pc Grinding Stone
What can you do with it?
- Sharpen the tooth of the chain
How to use?
- When sharpening a chainsaw, sharpen all of the teeth going in one direction, then with the saw in the same position, line the tool up with the second 30° mark and sharpen the teeth that run in the opposing direction
- Always try to do the same tooth two or three passes across each tooth
- Use the spacers for the best result
- They are used to move the pink or orange stones away from the attachment – so they don’t contact the attachment during operation
- The pink stone (the largest) requires both spacers
- The orange stone (the middle size) requires one spacer
- The blue/grey stone does not require any spacers
Materials to use on:
- Chains of chainsaw
Recommended speeds (RPM):
- Chainsaw Blade 30,000
Technical specifications
- Shank diameter: 3,2mm
- Working diameter: 4,8mm
- Accessory length: 50,0mm
- Mandrel use: No Mandrel Needed
- Width: 5,0mm
- Length: 5,0mm
- Height: 39,0mm
- Maximum RPM: 30,000
$1.58
Original: $5.28
-70%Dremel | 454 Grinding Stone 4.8mm 3Pc—
$5.28
$1.58Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
4,8mm 3Pc Grinding Stone
What can you do with it?
- Sharpen the tooth of the chain
How to use?
- When sharpening a chainsaw, sharpen all of the teeth going in one direction, then with the saw in the same position, line the tool up with the second 30° mark and sharpen the teeth that run in the opposing direction
- Always try to do the same tooth two or three passes across each tooth
- Use the spacers for the best result
- They are used to move the pink or orange stones away from the attachment – so they don’t contact the attachment during operation
- The pink stone (the largest) requires both spacers
- The orange stone (the middle size) requires one spacer
- The blue/grey stone does not require any spacers
Materials to use on:
- Chains of chainsaw
Recommended speeds (RPM):
- Chainsaw Blade 30,000
Technical specifications
- Shank diameter: 3,2mm
- Working diameter: 4,8mm
- Accessory length: 50,0mm
- Mandrel use: No Mandrel Needed
- Width: 5,0mm
- Length: 5,0mm
- Height: 39,0mm
- Maximum RPM: 30,000
